DIN 9003-5-1986 航空航天.轻金属薄板材和带材的弯曲.尺寸、极限偏差、补偿值

上一篇: DIN 65115-1986 航空和航天.带MJ螺纹、缩颈、标称抗拉强度1100MPa、温度235℃以下、钢制六角头螺栓
下一篇: DIN ISO 7913-1986 航空和航天.紧固件.螺栓和螺钉的形状和位置公差.等同采用ISO7913-1986

Product Code:SAE AMS7257
Title:Rings, Sealing, Perfluorocarbon (Ffkm) Rubber High Temperature Fluid Resistant 70-80
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a perfluorocarbon (FFKM) rubber in the form of molded o-rings. These sealing rings have been used typically in applications in contact with air or a variety of fuels, lubricants and hydraulic fluids from -15 to +290 degrees C (+5 to 554 degrees F), but usage is not limited to such applications. Each application, however, has to be considered individually. Instances are known when these rings have been used below -15 degrees C (+5 degrees F) and above 290 degrees C (554 degrees F). The cross section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness.【英文标准名称】:TestMethodforApplicationandAnalysisofSolidStateTrackRecorder(SSTR)MonitorsforReactorSurveillance,E706(IIIB)
【原文标准名称】:反应堆监测用固态径迹记录仪(SSTR)监视器的应用和分析的测试方法,E706(IIIB)
【标准号】:ASTME854-1990
【标准状态】:作废
【国别】:美国
【发布日期】:1990
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:分析;核能;监督(认可);反应堆;应用;监视器;控制仪器;核技术
【英文主题词】:nucleartechnology;controlinstruments;monitors;nuclearenergy;reactors;surveillance(approval);applications;analysis
【摘要】:
【中国标准分类号】:F82
【国际标准分类号】:27_120_10;27_120_20
【页数】:14P;A4
【正文语种】:英语